21
9 When the dialog box appears, asking if
you wish to restart the computer, click the
Restart button to restart the computer.
1 With the P-touch 2600/2610 and the Macintosh turned off, connect the P-touch to the
computer using the enclosed USB interface cable as described on page 6. Be sure to
leave the P-touch turned off.
2 Turn on the Macintosh.
3 Insert the enclosed CD-ROM into the com-
puter’s CD-ROM drive.
4 Double-click the Mac OS X folder to open
it.
5 Double-click the P-touch Editor 3.2 folder
to open it.
6 Double-click the P-touch Editor 3.2
Installer icon in the folder that appears.
The installer starts up, and then the Intro-
duction dialog box appears.
With Mac OS X 10.1 or later:
To Next Page
Loading...
