72
EXAMPLE
To cut a stamp:
1
Enter the text and insert a stamp film cassette in the tape compartment.
2 Hold down c and press U.
3 Press _.
4 Press p to engrave the stamp stencil film, and
then automatically cut it off.
To affix a stamp:
5
Remove the stamp frame from around the stamp
film holder ink pad, one side at a time, and then
remove the protective seal covering the ink pad
and the backing paper from the stamp stencil film.
6 With the glossy side of the stamp stencil film
upward, align one of its ends with the slit on the
side of the stamp film holder.
FORMAT?
STAMP
2:
1234 Main
1:
J Smith
1/ 1
COPIES
Tape end
Glossy side
Slit
To Next Page
Loading...
