GETTING STARTED
10
Turning Power On/Off
• When storing or discarding the battery, wrap it (for example with
cellophane tape), to prevent it from short-circuiting.
(Battery insulation example)
1. Cellophane tape
2. Alkaline or Ni-MH battery
Insert a Tape Cassette
NOTE
• When inserting the tape cassette, make sure that the tape and ink
ribbon do not catch on the print head.
• If you cannot close the tape cassette compartment cover, check to
ensure the release lever is in the up position. If not, lift the lever, and
then close the cover.
Turning Power On/Off
Press ( ) to turn the P-touch on.
Press ( ) again to turn the P-touch off.
NOTE
Your P-touch has a power saving function that automatically turns itself
off if no key is pressed within a certain time under certain operating
conditions. Refer to “Specifications” on page 53.
1
2
CAUTION
USING A COMBINATION OF DIFFERENT BATTERIES (SUCH AS Ni-MH AND
ALKALINE), MAY RESULT IN AN EXPLOSION. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS.
To Next Page
Loading...
