17
Entering and Editing Text
EDITING A LABEL
To delete all text and format settings:
Inserting a Tab
To insert a tab, press the following key.
When using the print preview mode, the symbol ( ) will then appear on
the screen.
NOTE
To delete a tab from a label, position the cursor to the right of the tab
mark on the text entry screen and press ( ).
To change tab length:
NOTE
You can also set the tab length by typing in the desired tab length. To
apply the setting, after typing in the tab length, press ( ) or ( )
and then ( ) or ( ) again.
Using Text Reminder
When a character is entered, the P-touch remembers character
sequences beginning with the character entered from a history of all
printed character sequences to date, and displays a list of options from
which to select. The default setting is [On].
Example:
() Î / [Text&Format] Î () or ( ).
().
() Î / [Tab Length] Î ( ) or ( ) Î / [0 - 100 mm] Î ()
or ( )
Î ( ) to return to the text entry screen.
Enter “B” Î () Î The P-touch displays a list of words printed beginning with
the letter “B” such as “Brother”
Î / Select the desired word Î Press to
display the entire word that is too long to display on the list of words. To return to
the list of words, press
Î Press ( ) or ( ), the selected character word
will then appear on the text line.
To Next Page
Loading...
