Brother P-Touch D600 - Using Auto-Format Layouts

25
Using Auto-Format Layouts
EDITING A LABEL
NOTE
You can also set the label and tab length by typing in the desired
length. To apply the setting, after typing in the length, press ( ) or
( ) and then ( ) or ( ) again.
Using Auto-Format Layouts
 Using Templates
Simply select a layout from the templates, enter the text and apply
formatting as desired.
Example - Asset Tag:
NOTE
• For details on barcodes, refer to “Creating a Barcode Label” on
page 34.
• On the print menu screen:
x Select [Edit] to change the text data or the
barcode setup.
x Select [Save] to store the label to the file
memory.
For the file memory, refer to “USING THE FILE MEMORY” on
page 46.
x Select [Menu] to change the font or style settings.
x Select [Preview] to preview the label before printing. Press
( ) to change the magnification of the LCD screen.
x Select [Print Options] to set the print settings. For details, refer to
“Numbering Printing” on page 42 or “Mirror Printing” on page 42.
() Î / [Auto Format] Î ( ) or ( ) Î / [Templates] Î ()
or ( )
Î / [Asset Management] Î ( ) or ( ) Î / [Asset
Tag 1]
Î () or ( ) Î Enter the text Î ( ) or ( ) Î Enter the
text for the next field
Î () or ( ) Î / Select an attribute for barcode
Î / Set a value for that attribute Î ( ) or ( ) Î Type in the barcode
data
Î ( ) or ( ) Î / [Print] Î () or ( ) Î / Select
the number of labels to be printed
Î ( ), ( ) or ( ).