EDITING A LABEL
30
Using Auto-Format Layouts
x Select [Preview] to preview the label before printing. Press
( ) to change the magnification of the LCD screen.
x Select [Print Options] to set the print settings. For details, refer to
“Numbering Printing” on page 42 or “Mirror Printing” on page 42.
x If the width of the current tape cassette does not match the set width
for the selected layout, an error message is displayed when you try
to print the label. Press ( ) or any other key to clear the error
message, and insert a tape cassette of the correct width.
Block Layouts
Attribute Value Details
24mm
2LineA
2LineB
3Line
1+2LineA
1+2LineB
1+3Line
1+4Line
1+5Line
To Next Page
Loading...
