Brother P-Touch D600 - Numbering Printing; Mirror Printing; Setting Tape Cutting Options; [Large Margin];[Small Margin];[Chain];[No Cut];[Special Tape]

LABEL PRINTING
42
Setting Tape Cutting Options
 Numbering Printing
Select the highest number you wish to be printed when setting the
number.
 Mirror Printing
Use clear tape in [Mirror], so the labels can be read
correctly from the opposite side when attached on
glass, windows or other transparent surfaces.
Setting Tape Cutting Options
 [Large Margin]/[Small Margin]/[Chain]/[No Cut]/[Special tape]
Tape Cutting Options
() + ( ) Î / [Number] Î () or ( ) Î / Select start
point
Î ( ) or ( ) Î / Select end point Î ( ) or ( ) Î
/ Select the number of labels to be printed
Î ( ), ( ) or ( ).
() + ( ) Î / [Mirror] Î ( ) or ( ) Î ( ), ( ) or ( ).
() Î / [Cut Option] Î () or ( ) Î / [Large Margin/Small
Margin/Chain/No Cut/Special tape]
Î ( ) or ( ) to apply the settings.
Setting Description Example
Large
Margin
Automatically cuts the tape after each
label is printed, leaving a margin of
24.5 mm on each end.
Small
Margin
Automatically cuts a piece of blank tape
before printing the first label and then
cuts the tape after each label is printed,
leaving a 2 mm margin at both ends of
each label.
ABC ABC
24.5 mm 24.5 mm
ABC ABC
24.5 mm
2 mm2 mm