EasyManua.ls Logo

Brother P-touch H500 - Page 23

Brother P-touch H500
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
GETTING STARTED
Power Supply
Confirm that the hooks on the edge of the rear cover are inserted correctly, and then
reattach the cover.
Removing the Rechargeable Li-ion Battery
Remove the battery cover and the rechargeable Li-ion battery, and then reattach the battery
cover.
Charging the Rechargeable Li-ion Battery
The rechargeable Li-ion battery can be charged while it is inserted in the P-touch. Perform
the following procedure to charge the rechargeable Li-ion battery.
Make sure that the P-touch is turned off. If the P-touch is turned on, press the
(Power) button to turn it off.
Make sure that the rechargeable Li-ion battery is installed in the P-touch.
Use the AC adapter and AC power cord to connect the P-touch
to an AC power socket.
The LED next to the adapter connector turns on during
charging, it goes off when the rechargeable Li-ion battery is
fully charged. The battery level indicator on the display will fill
with three bars .
Stopping Rechargeable Li-ion Battery Charging
To stop rechargeable Li-ion battery from charging, disconnect the AC adapter cord.
If you cannot attach the rear cover, check to ensure the white lever is in the up
position. If not, lift the lever, and then attach the cover.
3
Before using the rechargeable Li-ion battery, use the following procedure to charge it.
Up to 360 minutes is needed to fully charge a rechargeable Li-ion battery.
1
2
3
Tips on Using the Rechargeable Li-ion Battery
Charge the rechargeable Li-ion battery before use. Do not use it before it is charged.
The rechargeable Li-ion battery charging can take place inC-35°C environments.
Charge the rechargeable Li-ion battery in an environment in this temperature range.
If the surrounding temperature is out of this range, the rechargeable Li-ion battery
will not be charged, and the battery indicator will remain lit.
If the P-touch is used when both the rechargeable Li-ion battery is installed and the
AC adapter is connected, the battery indicator may turn off and charging may stop
even if the rechargeable Li-ion battery has not been fully charged.

Related product manuals