Brother P-touch PT-1400 - BLK LEN. (block length); FRAME; PRINT (print order)

13
Label Type Modes
●
BLK LEN. (block length): * For the PORT Label Type mode:
0.80" to 8.00" (20 to 200 mm)
Default: 1.20" (30 mm)
* For the PANEL Label Type mode:
0.25" to 8.00" (6 to 200 mm)
Default: 1.20" (30 mm)
●
FRAME: * For the PORT Label Type mode:
OFF, 1 , 2 , 3 , 4
Default: OFF
* For the PANEL Label Type mode:
OFF, 1 , 2 , 3 ,
4 , 5 , 6 ,
7 , 8 , 9
Default: OFF
●
PRINT (print order): FRONT, REVERSE
Default: FRONT
☞
For these types of labels, we recommend using Extra Strength Adhesive Tape.
☞
The PRINT parameter is only available with the PANEL Label Type mode.
☞
By using the Numbering function with the PANEL Label Type mode, a single label
containing multiple blocks of ascending characters can easily be created, for example,
to label patch panels as shown above. (For details on the Numbering function, refer to
Printing multiple copies with incremental characters on page 31.)