1
2
3
4
5
6
7
8
9
14
z GETTING STARTED
Power Supply
Battery
After making sure that the power is off, remove the
battery compartment cover on the back of the
machine. If the batteries are already in the
machine, remove them.
Insert six new AA-size alkaline batteries (LR6),
making sure that the positive (+) and negative (-)
ends of the batteries match the positive (+) and
negative (-) marks inside the battery compartment.
23
Attach the battery compartment cover by inserting
the three hooks at the bottom into the slots on the
machine, then pushing down firmly until it snaps
into place.
Power Supply
Make sure that the power is turned off when
replacing batteries.
1
Always replace all six batteries at the same
time using brand new ones.
2
3
• Remove the batteries if you do not intend to use the P-touch labeler for an extended period
of time.
To Next Page
Loading...
