12
To replace, add or delete the printer driver:
1 Turn off the PT-2300/2310, and then disconnect it from the computer.
2 Insert the P-touch Editor Version 3.1 CD-ROM
into the computer’s CD-ROM drive. A dialog
box automatically appears, allowing you to
select what to install.
☞ If the dialog box does not automati-
cally appear, double-click “My Com-
puter” on the desktop, double-click the
icon for the CD-ROM drive containing
the CD-ROM, and then double-click
“Ptsetup.exe” to display the dialog
box.
3 Click the bottom button (Printer driver). A
Driver Setup dialog box appears, allowing
you to select whether to replace, add or
delete the PT-2300/2310 printer driver.
4 Select the desired operation, and then click
the Next button.
☞ If “Replace with new Brother PT-2300/
2310” is selected, the previously
installed printer driver is deleted, and
replaced with a new one. Select this
option when upgrading the printer
driver, or when running Windows
2000 and changing to a PT-2300/2310
with a different serial number.
If “Add Brother PT-2300/2310” is selected, a new printer driver is added. With a
USB connection on Windows
®
98/Me, only a port is added without adding it as a
new printer. Select this option when connecting and using multiple PT-2300/2310s
with the same computer.
5 If “Replace with new Brother PT-2300/
2310” or “Add Brother PT-2300/2310” was
selected: A dialog box appears, instructing
you to connect the PT-2300/2310 to the
computer.
To Next Page
Loading...
