45
EXAMPLE
With the Frame function, you can choose from various frames and highlights to design a more
decorative or emphasized label.
The default setting is FRAME OFF; however, the following six settings are also available.
When any setting other than FRAME OFF is selected, the Undl/Frm indicator on the right side
of the display comes on.
To change the frame setting:
1 While holding down c, press 6 once, and keep c held down to display the
current frame setting.
To select the UNDL ON underline setting:
1
While holding down c, press 5 once,
and keep c held down.
2 While still holding down c, continue pressing
5 until UNDL ON is displayed.
3 Release c.
OFF
UNDL
Caps
Alt
ON
UNDL
Caps
Alt
FRAME FUNCTION
To Next Page
Loading...
