Brother P-touch PT-D410 User Manual

Home > Print Labels > Adjust the Label Length
Adjust the Label Length
When the Tape Cassette is almost empty, the printed label length may be less accurate. In this case, adjust the
label length manually.
Approximately 1% of the total label length is adjusted by one level.
>> PT-D410
>> PT-D460BT
PT-D410
1. Press .
2. Press a or b to display [Adjustment], and then press OK.
3. Press a or b to select [Label Length].
4. Press d or c to display [-3 - +3], and then press OK.
PT-D460BT
1. Press .
2. Press d or c to display [Settings], and then press OK.
3. Press a or b to display [Adjustment], and then press OK.
4. Press a or b to display [Label Length], and then press OK.
5. Press d or c to display [-3 - +3], and then press OK.
Related Information
• Print Labels
90

Brother P-touch PT-D410 Specifications

General

Model	PT-D410
Series	P-touch
Device Category	Label Maker
Print Resolution	180 dpi
Tape Sizes	3.5mm, 6mm, 9mm, 12mm, 18mm
Tape Type	TZe
Display	LCD
Keyboard Type	QWERTY
Cutter	Manual
Connectivity	USB
Maximum Print Height	0.63" (15.8 mm)
Maximum Tape Width	18 mm
Print Speed	20 mm/sec
Power Source	AC adapter or 6 AA batteries