Brother P-Touch PT-D450 - Turning Power On;Off; Setting Language and Unit; Feeding Tape; Setting LCD Display

11
Turning Power On/Off
GETTING STARTED
Turning Power On/Off
Press ( ) to turn the P-touch labeler on.
Press ( ) again to turn the P-touch labeler off.
NOTE
Your P-touch labeler has a power saving function that automatically
turns itself off if no key is pressed within a certain time under certain
operating conditions. Refer to “Specifications” on page 45.
Setting Language and Unit
 Language
When you turn on the P-touch labeler for the first time, you are asked to
set the default language. Select language using or , and then press
() or ( ).
 Unit
The default setting is [inch].
Feeding Tape
To feed the tape, press the following keys:
Setting LCD Display
 LCD Contrast
The default setting is [0].
() Î / [Settings] Î () or ( ) Î / [ Language] Î () or
()
Î / [English/Español/Français/Hrvatski/Italiano/Magyar/
Nederlands/Norsk/Polski/Português/Português(Brasil)/Română/Slovenski/
Slovenský/Suomi/Svenska/Türkçe/Čeština/Dansk/Deutsch]
Î ( ) or ( ).
() Î / [Settings] Î () or ( ) Î / [Unit] Î () or ( )
Î / [inch/mm] Î ( ) or ( ).
() + ().
() Î / [Settings] Î () or ( ) Î / [Adjustment] Î () or
()
Î / [LCD Contrast] Î ( ) or ( ) Î / [-2 - +2] Î ()
or ( ).