EDITING A LABEL
16
Entering and Editing Text
Inserting a Tab
To insert a tab, press the following key.
The symbol ( ) will then appear on the screen.
NOTE
To delete a tab from a label, position the cursor to the right of the tab
mark on the text entry screen and press ( ).
To change tab length:
NOTE
You can also set the tab length by typing in the desired tab length. To
apply the setting, after typing in the tab length, press ( ) or ( ) and
then ( ) or ( ) again.
Using Text Reminder
When a character is entered, the P-touch labeler remembers character sequences
beginning with the character entered from a history of all printed character
sequences to date, and displays a list of options from which to select. The default
setting is [On].
Example:
NOTE
To close the list of words and return to the text entry screen, press
().
().
() Î / [Tab Length] Î ( ) or ( ) Î / [0.0" - 4.0"
(0 - 100 mm)]
Î ( ) or ( ) Î ( ) to return to the text entry screen.
Enter “B” Î () Î The P-touch labeler displays a list of words printed
beginning with the letter “B” such as “Brother”
Î / Select the desired word
Î Press to display the entire word that is too long to display on the list of
words. To return to the list of words, press
Î Press ( ) or ( ), the
selected character word will then appear on the text line.
To Next Page
Loading...
