Brother P-Touch PT-D450 - Setting Label Attributes ([Length];[Cut Option];[Tab Length]); Using Templates

EDITING A LABEL
24
Setting Label Attributes ([Length]/[Cut Option]/[Tab Length])
Setting Label Attributes ([Length]/[Cut Option]/
[Tab Length])
Length : [Length] can be set within the range 1.2" (30 mm) - 12.0"
(300 mm). When [Auto] is selected, the length of the label
is automatically adjusted based on the amount of text
entered.
Cut Option : Refer to “Setting Tape Cutting Options” on page 34.
Tab Length: Refer to “To change tab length:” on page 16.
NOTE
You can also set the label and tab length by typing in the desired
length. To apply the setting, after typing in the length, press ( ) or
( ) and then ( ) or ( ) again.
Using Auto-Format Layouts
 Using Templates
Simply select a layout from the templates, enter the text and apply
formatting as desired.
Example - Asset Tag:
() Î / Select an attribute Î ( ) or ( ) Î / Set a value for
that attribute
Î ( ) or ( ) Î ( ) to return to the text entry screen.
() Î / [Auto Format] Î () or ( ) Î / [Templates] Î ()
or ( )
Î / [Asset Management] Î ( ) or ( ) Î / [Asset
Tag]
Î () or ( ) Î Enter the text Î ( ) or ( ) Î Enter the text for
the next field
Î ( ) or ( ) Î / Select an attribute for bar code Î
/ Set a value for that attribute
Î ( ) or ( ) Î Type in the bar code
data
Î () or ( ) Î / [Print] Î ( ) or ( ) Î / Select the
number of labels to be printed
Î ( ), ( ) or ( ).