Brother P-Touch PT-D450 - Using Block Layouts

27
Using Auto-Format Layouts
EDITING A LABEL
 Using Block Layouts
Simply select a layout from the block layouts, enter the text and apply
formatting as desired.
NOTE
• On the print menu screen:
x Select [Edit] to change the text data or the
bar code setup.
x Select [Save] to store the label to the file
memory.
For the file memory, refer to “USING THE FILE MEMORY” on
page 39.
x Select [Menu] to change the font, align or frame settings.
x Select [Preview] to preview the label before printing.
x Select [Print Options] to set the print settings. For details, refer to
“Numbering Printing” on page 34 or “Mirror Printing” on page 34.
Cable Labeling
Flag 1
(0.47" x 3.5" [12 mm x 90 mm])
Flag 2
(0.47" x 3.5" [12 mm x 90 mm])
Cable Wrap
(0.70" x 1.5" [18 mm x 39 mm])
Faceplate(VRT)
(0.47" x 2.7" [12 mm x 70 mm])
Category Value Details
() Î / [Auto Format] Î () or ( ) Î / [Block Layouts] Î
() or ( )
Î / Select a tape width Î () or ( ) Î / Select
a block layout
Î () or ( ) Î Enter the text Î ( ) or ( ) Î Repeat
for each text field
Î ( ) or ( ) to display the print menu Î / [Print]
Î ( ) or ( ) Î / Select the number of labels to be printed Î (),
() or ( ).