Brother P-Touch PT-D450 - Numbering Printing; Mirror Printing; Setting Tape Cutting Options

LABEL PRINTING
34
Setting Tape Cutting Options
 Numbering Printing
Select the highest number you wish to be printed when setting the
number.
 Mirror Printing
Use clear tape in [Mirror], so the labels can be read
correctly from the opposite side when attached on
glass, windows or other transparent surfaces.
Setting Tape Cutting Options
 [Large Margin]/[Small Margin]/[Chain]/[No Cut]/[Special tape]
Tape Cutting Options
() + () Î / [Number] Î () or ( ) Î / Select start point
Î () or ( ) Î / Select end point Î () or ( ) Î / Select
the number of labels to be printed
Î ( ), ( ) or ( ).
() + () Î / [Mirror] Î ( ) or ( ) Î ( ), ( ) or ( ).
() Î / [Cut Option] Î () or ( ) Î / [Large Margin/Small
Margin/Chain/No Cut/Special tape]
Î ( ) or ( ) to apply the settings.
Setting Description Example
Large
Margin
Each label is printed, leaving
a margin of 0.94" (23.9 mm)
on each end.
Small
Margin
A margin of 0.89" (22.5 mm) is
printed first, and then each
label is printed, leaving a
margin of 0.16" (4 mm) before
and after the text.
ABC
0.94"
(23.9 mm)
0.94"
(23.9 mm)
ABC
0.89"
(22.5 mm)
0.16"
(4 mm)
0.16"
(4 mm)