III-
12
[ 4 ] Removing the Sub ASSY Inlet
(1) Remove the solder of the sub ASSY inlet from the power supply ASSY.
Fig.3.1-15 Removing the Removing the Sub ASSY Inlet (1)
(2) Release the hooks on both sides of the sub ASSY inlet and pull the inlet to the direction
of the arrow as shown in the figure below to remove it.
Fig.3.1-16 Removing the Removing the Sub ASSY Inlet (2)
Sub ASSY inlet harness
Power supply ASSY
Hooks
Under cover
Sub ASSY inlet
1
1
2
Sub ASSY
inlet harness
Power supply ASSY
To Next Page
Loading...
