Brother P-Touch QL-570 - 6 ] Removing the Side Cover L, R

 III-
14
[ 6 ] Removing the Side Cover L, R
(1) Turn the main body upside down, and remove the two screws from the under cover.
Fig.3.1-18 Removing the Side Cover L, R (1)
(2) Detach the Portion A of the side cover L by hooking your nail on it, and then slightly lift
the rear side of the side cover L from the main body.
Fig.3.1-19 Removing the Side Cover L, R (2)
Screw
Screw
Under cover
<Bottom of main body>
Side cover L
“A”