III-
44
[ 7 ] Installing the Media PCB ASSY
(1) Assemble the media PCB ASSY with the two screws.
Important: When replacing the media PCB ASSY, and then check the items
using the “MAINTENANCE SOFTWARE OPERATION” in APPENDIX 1.
Fig.3.2-30 Installing the Media PCB ASSY
[ 8 ] Installing the Sub ASSY Inlet
(1) Put the harnesses of the sub ASSY inlet through the holes on the under cover.
(2) Insert the sub ASSY inlet to the hole of the under cover and put it until its hooks are
properly hooked.
Fig.3.2-31 Installing the Sub ASSY Inlet (1)
Screws
Under cover
Hooks
Media PCB ASSY
Main body
Sub ASSY inlet
Hole
Harness
To Next Page
Loading...
