III-
46
[ 9 ] Installing the Power supply ASSY and Main PCB ASSY
(1) Attach the insulating sheet S onto the under cover as shown in the figure below.
Fig.3.2-34 Installing the Power supply ASSY and Main PCB ASSY (1)
(2) Assemble the ground spring plate, FG harness ASSY and main PCB ASSY with the
three screws.
Fig.3.2-35 Installing the Power supply ASSY and Main PCB ASSY (2)
Insulating sheet S
Screws
Main PCB ASSY
Under cover
Screw Ground spring plate
FG harness ASSY
FG harness ASSY
Boss
Under cover
Under cover
Slit
To Next Page
Loading...
