III-
51
[ 11 ] Installing the Top Cover and Thermal Tape
(1) Insert one of the two bosses of the top cover into the corresponding rib hole of the upper
cover, and then insert the other boss to the rib hole by bending the rib.
Fig.3.2-44 Installing the Top Cover and Thermal Tape (1)
(2) Assemble Link lever onto the top cover.
Fig.3.2-45 Installing the Top Cover and Thermal Tape (2)
Bosses
Ribs
Top cover
Top cover
Upper cover
Upper cover
1
1
2
2
Top cover
Link lever
Rib
Rib
To Next Page
Loading...
