Brother P-Touch QL-570 - APPENDIX 1.1 Purpose and Use Procedure of the Reset Software Tool (Ql500 Tstreset.exe)

APPENDIX 1.1 Purpose and Use Procedure of the Reset Software Tool
(ql500tstReset.exe)
Note: Be sure to reset the EEPROM before making an examination after repair work is done.
This tool serves to reset the EEPROM.
<Operating Procedure>
(1) Start the reset software. (File name: ql500tstReset.exe)
The following screen appears. (Fig. 1)
(2) Connect the machine to your PC with the USB cable and turn the ON/OFF button ON.
Fig. 1
Note: When new hardware is detected and the “New hardware detection wizard” screen
appears, press the [Cancel] button.
3