120
Tutorial 6-1: Auto Punch
Step 3
Applying an image mask and
adjusting its size and position
Click 1 to select the circle mask.
Drag handle 2 to adjust the size of the mask,
and drag the mask to adjust its position.
Click Next.
c
“Select Mask dialog box” on page 134.
1 indicates the Design Page.
Drag the image to adjust its output location
and size.
Click Next.
c
“Check Mask Shape/Modify Image dialog
box” on page 135
Step 4
Creating a border from the
mask outline and converting
to an embroidery pattern
Select the Add mask outline check box,
check the preview image, and then click
Finish.
The image is automatically hidden and
stitches are automatically input.
b Memo:
The mask outline selected here can be used
as line data (border) in Step 4.
XE8656-001.book Page 120 Monday, May 24, 2010 5:44 PM
To Next Page
Loading...
