Brother PE-Design Next - Photo Stitch 1 Features

125
Creating Embroidery Patterns Using Images
Photo Stitch 1 Features
Photo Stitch 1 Features
Photo Stitch 1 Parameters
dialog box
With Color, Sepia or Gray:
With Mono:
Specify the desired settings under Sewing Option
(1) and Color Option (2), and then click Update
Preview (3) to preview the effects of the specified
settings. Click Finish (4) to convert the image to an
embroidery pattern.
(1) Sewing Option
(3)
(4)
(1) (2)
(3)
(4)
(1)
(2)
Detail
Selecting a setting closer to Fine
creates more details in the pattern and
increases the number of stitches. (The
stitches will be overlapping.)
Run Pitch
When the value is lowered, the sewing
pitch (stitch length) will be shortened,
resulting in finer stitching.
Sew Page
Color
(Available
only with
Color, Sepia
and Gray)
If this check box is cleared, the parts of
the pattern that are the same color as
the Design Page will not be sewn.
If it is selected, those parts will be sewn.
Conversion
Priority
To give priority to creating a pattern as
close to the original photograph, select
Stitch Quality.
To give priority to reducing the number
of jump stitches, select Jump Stitch
Reduction.
Image Type
If Photo is selected, the thread colors
will be mixed together, which will result
in a more natural look.
If Cartoon is selected, the thread colors
will not be mixed together, which will
result in a more simply colored look.
Select Photo for image data from a
photograph, etc. Select Cartoon for
image data from an illustration, etc.
Add mask
outline
If this check box is selected, line data is
created from the mask outline.
XE8656-001.book Page 125 Monday, May 24, 2010 5:44 PM