136
Advanced Stitch Wizard Operations
■ Gray Balance / Modify Image
dialog box
If Mono was selected for Photo Stitch 1 or Photo
Stitch 2:
The following dialog box appears.
Adjust the position and size of the image and the
gray balance, and then click Next to continue to the
next step.
Drag the image to move it. Drag the handles to
adjust the size of the image.
Drag the slider (1) to adjust the gray balance.
Importing to Design Center
We will create embroidery data in Design Center by
using an image that was opened in Layout & Editing.
Click 1, then 2.
Design Center starts up and the image
appears in the Design Page.
c
“Basic Design Center Operations” on
page 184 and “Line Image Stage” on
page 196
(1)
Embroidery
pattern
size
XE8656-001.book Page 136 Monday, May 24, 2010 5:44 PM
To Next Page
Loading...
