Brother PE-Design Next - Page 153

151
Operations for Specific Applications
Tutorial 8: Manual Punching
Creating an original logo
Using the Manual Punch tools, an embroidery pattern can be created using an image of your logo in the
background.
1. Open an image of the logo to be used to
create the embroidery pattern.
c
“Importing Image Data” on page 137
As an example, the “&” in the middle of the logo will
be used to create an embroidery pattern.
2. First, select the Manual Punch tool. Click 1,
then 2, then 3.
3. Click in the Design Page to specify points 1
through 4.
4. After specifying point 4, click , and
then click in the Design Page to specify points
5 through 7.
5. After specifying point 7, click , and
then click in the Design Page to specify points
8 through 10.
6. After specifying point 10, click , and
then click in the Design Page to specify points
11 through 13.
b Memo:
A faded copy of the background image can be
displayed in the Design Page.
c
“Adjusting the density of the
background image” on page 140
1
2
3
1
2
3
4
5
6
7
8
9
10
13
11
12
XE8656-001.book Page 151 Monday, May 24, 2010 5:44 PM