257
Selecting a Character and Preparing the Template
4. To delete a registered character, select the
character, and then click Remove.
The box is selected in red. Each click of the
character switches between selecting and
deselecting it.
5. When the settings can be applied, click OK.
Opening a template
(TrueType font)
1. Click 1, then 2, then 3.
2.
From the
Font
selector, select the font. From the
Style
selector, select the character style. And
then click
OK
.
• While working on a character in a font, the
same TrueType font appears until a
different template is selected for the
background. Each time a different
character is selected in the Select
Character box, the template of the
character in the same TrueType font
appears.
b Memo:
If a character is registered even though a font
has not been created, the information for the
registered character is saved in a font file.
b Memo:
• If the character selected in the
Select
Character
box is not available in the
TrueType font, “
?
” appears as the template.
• If a TrueType font was selected as the
template, it cannot be moved or resized.
And in this case, it can automatically be
converted to a font character pattern.
c
“Automatically converting
TrueType fonts” on page 258.
• In addition, the character cannot be drawn
with the semi-automatic block-type punch
tool.
XE8656-001.book Page 257 Monday, May 24, 2010 5:44 PM
To Next Page
Loading...
