Brother PE-Design Next - Page 80

78
Opening/Importing Embroidery Designs
Importing embroidery
designs
■ From Design Library
1. Click 1, then 2, then 3.
2. From the Category selector, select a category
to display the corresponding embroidery data.
3. Select the file icon for the design to be
imported, and then click Import, or double
click the file icon.
4. Click to close it.
■ From a folder
1. Click 1, then 2, then 3.
2. Click .
3. Select a folder, and then click OK.
4. From the File Type box, select a file name
extension to display the corresponding
embroidery data.
5. Select the file icon, and then click Import.
The file is imported.
b Memo:
• The design can be imported by dragging its
file icon from the
Import dialog box to the
Design Page.
• Multiple files cannot be selected to be
imported at the same time.
• With the buttons at the top of the
Import
dialog box, change the location from where
the file is to be imported.
1
2
3
a Note:
When importing designs from other vendors,
be sure to choose a design that will fit in the
Design Page.
1
2
3
Indicates the path to the currently selected folder.
XE8656-001.book Page 78 Monday, May 24, 2010 5:44 PM