237
Creating Custom Fonts (Font Creator)
Starting up Font Creator
1. Click , then select All Programs,
then PE-DESIGN Ver7, then Font Creator to
open the Font Creator window.
→ The Font Creator window appears.
Opening a File
Creating a new font
You can begin with a blank work area to design a
new font.
Toolbar button:
1. Click , or click File, then New.
→ If the current work area has already been
saved or has not been edited, a new work
area appears immediately.
→ If the current work area has not been
saved, you will be asked whether you
want to save the changes.
c
“Opening a font file” on this page,
“Overwriting” on page 253 and “Saving
with a new name” on page 253
Opening a font file
A previously created or saved font file can be
opened to be edited.
Toolbar button:
1. Click , or click File, then Open.
b Memo:
To fill the entire screen with the Font Creator
window, click the maximize button on the right
end of the title bar.
b Memo:
• To save the work area, click
Yes
.
• To abandon the work area, click
No
.
• To return to the work area, for example, to
modify it or save it with another file name,
click
Cancel
.
To Next Page
Loading...
