Brother PE-DESIGN V7 - Automatically Converting an Image to an Embroidery Design (Cross Stitch Function); Step1 Importing Image Data into Layout & Editing

22
Tutorial
Automatically Converting an Image to an
Embroidery Design (Cross Stitch
Function)
In this section, we are going to use the Cross Stitch function to automatically create a cross-stitch embroidery
pattern from an image.
This procedure will go through each step of the basic operation.
Step 1 Importing image data into
Layout & Editing
First, we need to import the image that will be
converted into an embroidery pattern.
For this example, we will use the tulip image
(tulip.bmp) provided with this application.
Start up Layout & Editing.
Click , then select All Programs,
then PE-DESIGN Ver7, then Layout &
Editing.
Import the image.
Click Image, then Input, then from File.
Double-click the ClipArt folder to open it.
Select the sample file tulip.bmp, and then
click Open, or double-click the file’s icon.
Step 1 Importing image data into Layout & Editing
Step 2 Automatically converting the image to an embroidery pattern (Cross Stitch function)
Step 3 Displaying a preview of the embroidery
Step 4 Saving the embroidery design
Step 5 Transferring the design to an original card
1
2