Brother PJ-600 Series - Page 38

Brother PJ-600/700/800 Series Command Reference
35
© 2015 Brother Industries, Ltd. All Rights Reserved.
Name
Specify CR-LF mode
Syntax
ESC + ~ + L + {n1}
1B H + 7E H + 4C H + {n1}
Description
Select the operation mode for receiving a new line command.
Definition of {n1}:
00 H(0): LF = LF CR = CR
01 H(1): LF = CR + LF CR = CR + LF
Name
Specify Paper sensor threshold
Syntax
ESC + ~ + e + S + {n1}
1B H + 7E H + 65 H + 53 H + {n1}
Description
Specify the threshold for the sensor that detects the paper.
Definition of {n1}:
00 H(0) ～ FF H(255)
Name
BT/IrDA *Available only with PJ-662 and PJ-663.
Syntax
ESC + ~ + e + l + {n1}
1B H + 7E H + 65 H + 6C H + {n1}
Description
Select whether a Bluetooth or an IrDA connection is to be used.
Definition of {n1}
00 H(0):IrDA
01 H(1):Bluetooth
Name
Specify Wireless Switching Mode *Available only with PJ-662 and PJ-663.
Syntax
ESC + ~ + e + M + {n1}
1B H + 7E H + 65 H + 4D H + {n1}
Description
Select whether or not print unit buttons (Feed button + power button) can be
pressed to switch between using a Bluetooth or an IrDA connection.
Definition of {n1}:
00 H(0):Disable
01 H(1):Enable