Brother PJ-600 Series - Page 40

Brother PJ-600/700/800 Series Command Reference
37
© 2015 Brother Industries, Ltd. All Rights Reserved.
Name
Specify Default font
Syntax
ESC + k + {n1}
1B H + 6B H + {n1}
Description
Select the font to be used.
Definition of {n1}
00 H(0):Serif
01 H(1):Sans Serif
Name
Specify reduced characters
Syntax
ESC + 0x0F
1B H + 0F H
Description
The width of proportional characters is halved (10 cpi→16.67 cpi and 12 cpi → 20
cpi).
After this command is specified, the page length in lines and bottom margin must
be specified again.
In addition, the final character size when this command is executed and the
“specify double-width characters” is set becomes the size of the double-width
characters after they are reduced.
Name
Cancel reduced characters.
Syntax
ESC + 0x12
1B H + 12 H
Description
Cancels reduced characters
After this command is specified, the page length in lines and bottom margin must
be specified again.
Name
Apply bold style
Syntax
ESC + E
1B H + 45 H
Description
Applies the bold style to alphanumeric characters.