Brother PJ-600 Series - Page 42

Brother PJ-600/700/800 Series Command Reference
39
© 2015 Brother Industries, Ltd. All Rights Reserved.
Name
Specify/retrieve Bluetooth settings
*Available only with PJ-662 and PJ-663.
Syntax
ESC + ~ + e + B + {n1} + ・・・
1B H + 7E H + 65 H + 42 H + {n1} + ・・・
Description
Specifies or retrieves Bluetooth settings in the utility.
Definition of {n1}
00 H(0): Retrieve
01 H(1): Specify
…Additional
00 H(0):PIN Code(less than 16 characters)
01 H(1):Device Name(less than 30 characters)
02 H(2): Visible to Other Devices
00 H(0):Disable
01 H(1):Enable
03 H(3): Authentication and Encoding
00 H(0): No authentication/no encoding
01 H(1): Authentication/no encoding
02 H(2): Authentication/encoding
04 H(4): Retrieve BT address (*Invalid if “Specify” is set for {n1}.)
ex1) 1B H 7E H 65 H 42 H 01 H 00 H 04 H 0001
Specify PIN Code Number of characters
Setting
→Sets the PIN code to 0001.
ex2) 1B H 7E H 65 H 42 H 00 H 00 H
Retrieve PIN Code
→Retrieves the PIN code. (Reception example: 0x04 0001)
ex3) 1B H 7E H 65 H 42 H 01 H 01 H 0A H PJ-6630001
Specify Device Name Number of characters
Setting
→Sets the device name to PJ-6630001.
ex4) 1B H 7E H 65 H 42 H 00 H 01 H
Retrieve Device Name
→Retrieves the device name. (Reception example: 0x0A PJ-6630001)