Brother PJ-723 - Page 57

Changing the Printer Settings
49
3
6 Settings Tabs
Contain settings that may be specified or changed.
If appears in the tab, the settings in that tab will not be applied to the printer.
7 Settings Display/Change Area
Displays the current settings for the selected item.
8 Refresh
Updates the displayed settings with the most recent information.
9Exit
Exits [Communication Settings], and returns to the main window of the “Printer Setting Tool”.
Important
Settings are not applied to printers if the [Exit] button is clicked without clicking the [Apply] button after
changing settings.
10 Apply
Applies the settings to the printer.
To save the specified settings in a command file, select [Save in Command File] from the drop-down
menu. The saved command file can be used with the mass storage mode to apply the settings to a printer.
(See Mass Storage Mode on page 91.)
Important
Clicking [Apply] applies all settings in all tabs to the printer.
If the [Disable these settings] check box is selected, the settings in that tab are not applied.