Product Dimensions
155
17
Mounting Notes
*1
Secure the battery cavity mounting block to the printer first.
*2
Secure the battery cavity mounting block to the desired surface.
Brother Testing Conditions
These values are not guaranteed. When mounting the printer for use, make sure the printer is mounted securely.
*1
Size: Use M2.6 tapping screws; Screw hole depth: 6 mm; Tightening torque: 2.2 kgf·cm; Material: Steel
30
218.5
255
22.1
228.117.3
55
61.35
33.85 203
126
1.36" (34.5 )
34.5
47
77.35 84.3
*2
*1
15 3.1
To Next Page
Loading...
