Using the Printer
38
2
Advanced pop-up menu 2
1 Density
Specifies the printing density.
Available settings: [Printer Default], 0-10
2 Print Speed
Specifies the printing speed in inches or millimeters per second. Reducing the printing speed improves the
print quality.
Available settings: [Printer Default], [1.1 ips / 27 mm/s], [1.6 ips / 41 mm/s], [1.9 ips / 48 mm/s], [2.5 ips
/ 65 mm/s]
3 Negative Printing
Prints with black and white inverted.
4 Dash Line Print
Prints dash lines between pages, useful when printing on roll paper. Set [Form Feed Mode] to [Fixed
Page] and [Paper Type] to [Roll], and then select [Enable]. Note that dash lines are printed on the paper;
they are not punched into the paper.
Available settings: [Disable], [Enable]
To Next Page
Loading...
