Home > Security > Configure Certificates for Device Security > Create a Certificate Signing Request (CSR)
and Install a Certificate from a Certificate Authority (CA) > Install a Certificate on Your Printer
Install a Certificate on Your Printer
Related Models: PJ-883
When you receive a certificate from a CA, follow the steps below to install it into the print server:
Only a certificate issued with your printer's CSR can be installed onto the printer. When you want to create
another CSR, make sure that the certificate is installed before creating another CSR. Create another CSR only
after installing the certificate on the printer. Otherwise, the CSR you created before installing will be invalid.
1. Start your web browser.
2. Type "https://printer's IP address" in your browser's address bar.
For example:
https://192.168.1.2
If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as
"SharedPrinter" instead of the IP address.
For example:
https://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
For example:
https://brnxxxxxxxxxxxx
3. If required, type the password in the Login field, and then click Login.
The default password to manage this printer's settings is located in the battery cavity and marked "Pwd".
4. Go to the navigation menu, and then click Network > Security > Certificate.
Start from if the navigation menu is not shown on the left side of the screen.
5. Click Install Certificate.
6. Browse to the file that contains the certificate issued by the CA, and then click Submit.
The certificate has been created and saved in your printer's memory successfully.
To use SSL/TLS communication, the Root Certificate from the CA must be installed on your computer. Contact
your network administrator.
Related Information
• Create a Certificate Signing Request (CSR) and Install a Certificate from a Certificate Authority (CA)
109
To Next Page
Loading...
