Home > Security > Use SSL/TLS > Print Documents Securely Using SSL/TLS > Print Documents Using
SSL/TLS
Print Documents Using SSL/TLS
Related Models: PJ-883
To print documents securely with IPP protocol, use the IPPS protocol.
1. Start your web browser.
2. Type "https://printer's IP address" in your browser's address bar.
For example:
https://192.168.1.2
If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as
"SharedPrinter" instead of the IP address.
For example:
https://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
For example:
https://brnxxxxxxxxxxxx
3. If required, type the password in the Login field, and then click Login.
The default password to manage this printer's settings is located in the battery cavity and marked "Pwd".
4. Go to the navigation menu, and then click Network > Network > Protocol.
Start from if the navigation menu is not shown on the left side of the screen.
5. Make sure the IPP checkbox is selected.
If the IPP checkbox is not selected, select the IPP checkbox, and then click Submit.
Restart your printer to activate the configuration.
After the printer restarts, return to the printer's web page, type the password, go to the navigation
menu, and then click Network > Network > Protocol.
6. Click HTTP Server Settings.
7.
Select the
HTTPS(Port 443)
checkbox in the
IPP
area, and then click Submit.
8.
Restart your printer to activate the configuration.
Communication using IPPS cannot prevent
unauthorized
access to the print server
.
Related Information
• Print Documents Securely Using SSL/TLS
127
To Next Page
Loading...
