Brother PJ-822 - Remove the Rechargeable Li-Ion Battery

Home > Set Up Your Printer > Remove the Rechargeable Li-ion Battery
Remove the Rechargeable Li-ion Battery
1. Slide Battery Latch 1 (a) to the unlocked position.
2. While holding Battery Latch 2 (b) in the unlocked position, remove the Rechargeable Li-ion Battery (c).
b
c
a
a. Battery Latch 1
b. Battery Latch 2
c. Rechargeable Li-ion Battery
3. Release Battery Latch 2.
4. Insert the Battery Cavity Mounting Block (a) into the Battery Cavity (b) until it locks into place.
b
a
a. Battery Cavity Mounting Block
b.
Battery Cavity
5.
Slide Battery Latch 1 to the locked position.
Related Information
• Set Up Your Printer
22