Home > Install Software > Connect the Printer to a Computer or Mobile Device > Connect the Printer to a
Computer Using Wi-Fi > Connect the Printer to a Computer Using WPS (Wi-Fi Protected Setup
™
)
Connect the Printer to a Computer Using WPS (Wi-Fi Protected Setup
™
)
Related Models: PJ-883
1. Confirm that your Wi-Fi router/access point displays the WPS symbol.
2. Place the printer within the range of your Wi-Fi router/access point.
The range may differ depending on your environment. See the instructions provided with your Wi-Fi router/
access point.
3. Press the WPS button on your Wi-Fi router/access point.
4. Press and hold the Bluetooth and Wi-Fi button
on your printer for about five seconds.
The Bluetooth and Wi-Fi indicator
on the printer flashes in green once every second.
When the connection is established, the Bluetooth and Wi-Fi indicator lights in green . Computers and
mobile devices that are on the same network as the printer will have access to the printer. For more information,
see the instructions provided with your Wi-Fi router/access point.
The printer will try to connect using WPS for two minutes. If the Bluetooth and Wi-Fi button is pressed
for another five seconds during that time, the printer will continue trying to connect for an additional two
minutes.
Related Information
• Connect the Printer to a Computer Using Wi-Fi
42
To Next Page
Loading...
