Brother RJ-2035B - Charge the Battery; Charge the Printers Battery

15
3.2 Charge the Battery
Make sure you fully charge the battery before the first usage. This may take up to two
hours.
3.2.1 Charge the Printer's Battery
1. Open the Interface Cover and plug
the Power Cord into the Power Port.
RJ-2035B/RJ-2055WB
RJ-3035B/RJ-3055WB
2. Plug the Power Cord into a power
outlet (an electrical socket).
Note
For more information about the
battery charging cycle, see section
2.2.5 Battery Charging Cycle.
Charging Temperature
For safe and optimal charging, make sure you charge the printer's battery where the
temperature is between 0°C and 40°C (32°F and 104°F). Charging may stop if the
internal temperature of the printer or battery exceeds the maximum operating
temperature.