Brother RJ-3150 - Page 112

Printing Labels Using P-touch Template (RJ-3150 Only)
103
5
b Make sure that the printer is connected to the computer, and then transfer the label layout to the
printer.
1 Click [File]-[Transfer Template] to start Transfer Manager.
Note
Select the label layout from the list, and then right-click it to display a menu.
Click [Key Assign] to select a key number.
This is the label template number that will be used when printing.
2 Click [Transfer] to transfer the label layout to the printer.
c Connect the barcode reader.
For details on making connections, refer to Connecting a Barcode Reader on page 94.
d Print the label.
1 With the barcode reader, scan the “P-touch template command (initialise + begin specifying
settings)” barcode.