1. Boot Method
Select [AUTO], [BOOTP], [DHCP], [RARP] or [STATIC].
2. IP Address / Subnet Mask / Gateway
Specify the various values.
You can only enter settings when the IP address is set to [STATIC].
3. DNS Server Method
Select [AUTO] or [STATIC].
4. Primary DNS Server IP Address / Secondary DNS Server IP Address
You can only enter settings when the DNS server is set to [STATIC].
IPv6
1. Static IPv6 Address
Specify the value.
2. Enable this address
Select to make the specified static IPv6 address effective.
3. Primary DNS Server IPv6 Address / Secondary DNS Server IPv6 Address
Specify the values.
4. IPv6 Address List
Displays the list of IPv6 addresses.
Wireless Settings
1. Communication Mode
Select [Ad-hoc] or [Infrastructure].
2. SSID (Network Name)
Click [Search] button to display the SSID selections in a separate dialog box.
3. Channel
Select from the displayed options.
To Next Page
Loading...
