For network connection
1. Connect the printer to the network and turn it on.
2. Select [Modify Printer] from the [Administration] menu.
3. A list of connected printers appears. Select the target printer from [Discovered Network Printers].
4. Multiple identical printers may be listed depending on the supported network protocols. In that case, list them in descending order.
5. If the printer is not listed, select [Internet Printing protocol (http)], click [Continue], and then enter http://xx.xx.xx.xx (where xx.xx.xx.xx is the IP address of the printer) on the displayed page.
6. Select the options you want, and then click [Continue] to confirm your selection.
7. Click [Modify Printer].
To Next Page
Loading...
