Brother RJ-3230B - Page 146

• Delete Print Log
Deletes the print log stored in the printer.
• Option Settings
If the Do not display an error message if the current settings cannot be retrieved at startup check box
is selected, a message is not displayed the next time.
Basic Tab
• Auto Power On
Specifies whether the printer turns on automatically when the AC Power Cord is plugged into an electrical
socket.
• Auto Sleep
Specifies the amount of time to pass before the printer automatically goes into sleep mode.
- The printer will automatically enter sleep mode when the specified time elapses under the following
conditions:
• The printer does not receive data.
• In idle mode.
- Sleep mode is cancelled when the following operations are performed:
• A printer button is pushed.
• The Roll Compartment Cover is opened or closed.
• The printer receives data.
• The USB cable is disconnected and then reconnected.
• Auto Power Off
Specifies the period of time that passes before the printer turns off automatically.
- The printer will automatically enter power off mode when the specified time elapses under the following
conditions:
• The printer does not receive data.
• In idle mode.
- Power off mode is cancelled when the following operations are performed:
• A printer button is pushed.
• The Roll Compartment Cover is opened or closed.
• The printer receives data.
• The USB cable is disconnected and then reconnected.
• Battery Charge Level
Specifies the maximum charge level.
To get the longest life from the battery, select 80 %. Although the number of print jobs that can be printed on
a single charge will be less when you select 80 %, you can get a longer overall battery life.
• Text Direction
Selects the printing orientation.
• Print Speed
Selects the printer’s printing speed.
• Print Density
Adjusts the printer’s printing density.
• Cover Closed Setting
Selects the printer's action when the cover is closed.
- Select Media
142