7. Set Exit Position to Peeler in the Basic tab of the Printer Setting Tool.
NOTE
• When Peeler is set to Exit Position, [Tear Bar] in [Settings] and [Auto Detect] in
[Media] cannot be selected on the printer's LCD.
• For best performance, make sure the paper's head margin is at least 3 mm.
• When using the Label Peeler, paper dust may stick to the print head. Clean the print head regularly.
For more information, see Related Topics:
• Use the latest firmware when printing with the Label Peeler.
Related Information
• Label Peeler (Optional: PA-LP-007)
Related Topics:
• Maintenance
• Enable the Label Peeler Function
195
To Next Page
Loading...
