P-touch Template 2.0 Command Reference
- 100 -
Appendix C: Troubleshooting
Appendix C: Troubleshooting
If printing does not begin (main most frequent cause)
(1) The communication settings are incorrect.
(2) The command mode is not in the P-touch Template mode.
(3) The conditions for the print start trigger are not met.
The following three types of print start triggers exists, but the current selection is incorrect.
● When the specified text string is received
● When all objects are filled
● When the specified number of characters is received
If the settings described above are incorrect, use the P-touch Template Settings tool to specify the settings.
If a template linked to a database is not printed
(1) A delimiter character must be entered after the search text.
(2) The print start trigger must be “when the specified text string is received”.
Example:
To search for the key code (333333333333) for “Chocolate”, then print:
333333333333 09h ^ F F
To Next Page
Loading...
