Brother RJ-4030 - Example for Using External Characters in P-Touch Template 2.0

P-touch Template 2.0 Command Reference
- 16 -
3. Examples for Using Commands
3.3 Example for using external characters in P-touch Template 2.0
Here is the external character that will be printed.
Steps
1. Make a template and transfer it to the printer.
2. Store the external characters as a bitmap file, and drag & drop it to Transfer Manager.
3. Transfer the bitmap file from Transfer Manager to the printer.
4. In the P-touch Template Settings tool, select the assigned number for the stored template.
5. With the P-touch Template commands, select the assigned number for the bitmap file.
Step 1: Make a template and transfer it to the printer.
Stored template
Assigned number